Netgear Router Login - Setup a Netgear Router (Step-by-Step). Step by Step Netgear Router Setup or Configuration
Would you like to know how to setup a Netgear Router? Then watch this tutorial to know how.
In this video I will be showing you how to setup or configure your Netgear Wireless Router. This was divided into 3 simple steps. First one Setting up your Netgear Router to PC, second one is how to get Netgear Router Login page to configure it and the third one is resetting your Netgear Router Password.
First one, Setting up your Netgear Router to PC
Take your router and power it up using Adapter supplied with retail package. Connect the ISP cable to colored port. Now take the LAN cable and connect it to any one of the LAN port. The other end of the LAN cable should be connected to PC LAN input.
In case if you need to configure your Netgear Router with a Modem, then follow this method. This practise helps you to auto dial up your network for example in this case say BSNL network. Take your Modem and input your ISP to LINE port of Modem. Now take a LAN cable and connect it to your Modem. The other end of the LAN cable should be connected to colored port of Router as Input. Now get another LAN cable and input the same to router LAN port and PC LAN Port.
In this case you need to configure both Modem and Router separately. Refer this tutorial on how to configure your Modem to enable WiFi.
Second, getting login page of Netgear Router and the configuration part.
Turn your router to find the login IP address of Netgear Router. In you are not able to find it, try the following IP addresses. Make sure to power up your router before implementing these steps.
If you get the login page, enter the default values like username as "admin" and password as "password" or "1234".
If you are not able to get the Netgear Router Login Page with these IP addresses or failed to login with default login credentials, then follow the method to reset the router which I will be showing you in the next few minutes.
Hope you got the admin panel of the router. Here, go to Wireless Settings Tab and select "Enable SSID Broadcast". Name your SSID, Region and select WPA2-PSK [AES] in Security Options then enter the password that you would like to use to connect with Wireless Network.
That's it. You have successfully configured the Netgear Wireless Router.
Third step to know how to reset Netgear Wireless Router.
Turn your router to the back and next to your antenna, there will be a small pin switch. Take a pen or pencil and press this switch for about 10 seconds. Now wait for few minutes and try login with the previous IP address and credentials.
Subscribe to TechEmpty at http://www.youtube.com/user/techempty?sub_confirmation=1
Follow us on
Google Plus: https://plus.google.com/+techempty
BSNL Wireless Modem Configuration
Configure TP Link Wireless Router
Netgear Router Login - Setup a Netgear Router (Step-by-Step)
Tags: Netgear Router Login - Setup a Netgear Router (Step-by-Step), netgear, netgear router login, router, Netgear, setup, wireless, netgear router login page, netgear router login password, netgear router login ip address, techempty, netgear router setup, netgear router configuration, setup netgear router, netgear router configuration step by step, netgear router, configuration, netgear router installation, netgear router connection, netgear router configuration tutorial